The 20 Best Clean Guitar Amps You Can Buy In 2024

Many guitarists look for high-gain amps to break up their tone into great distortion ranges, but there are also many players who are after clean guitar amps as they offer a blank canvas for creating their own desired tones with pedals and other gear. That is why clean guitar amps have always been as popular as high-gain amps through the ages.

The choice of guitar amps comes down to taste in the end, as one type is not better than the other. The clean guitar amps reach much higher volume levels than high-gain amps before starting to break up. So if you want a good amp to take your pedals and other FX gear well, a clean guitar amp is the right choice for you. 

All the amps on the list deliver transparent sound with different features and wattages to suit your needs. There are not many choices on the market when it comes to good clean guitar amps, but you can check these ones and go with one without hesitation, as they are specifically and carefully picked amps for preserving your tone.

Supro 1970RK Keeley 

• 1 x 10″ Tube Combo Amplifier
• 25 watt
• 1 channel
• Effects loop
• High input headroom 
• 2 x ECC83S (12AX7) preamp tubes
• 2 x 6V6GT power tubes
• 2-band EQ, Volume, and Master knobs
• 1 x 1/4″ input, 1 x 1/4″ Send and Return 

Supro is the choice of great guitarists like Joe Perry and Joe Walsh. The Supro 1970RK Keeley model is one of the best clean guitar amps ever made with its straightforward design and compact size. The clean guitar amp sounds perfectly balanced without getting too bright or warm zones; it stays on the midrange realms with tonal richness to reflect your pre-made tones with your pedals.

If you want, it also provides a crispy and crunchy overdrive, but you must take into account that this amp is made to play with pedals, not alone. It offers a 2-band EQ with Volume and Master control knobs. It has 25-watt power with a 10” speaker. It also offers an effects loop with Send and Return ports. Overall, it is a great and basic amp to preserve your tone and give you high volume.

Fender Blues Junior IV

•  1 x 12″ Combo Tube Guitar Amplifier 
• 15-watt
• 1-channel
• Fat Switch
• Spring Reverb effect
• 12” Celestion Speaker 
• 3 x 12AX7 preamp tubes
• 2 x EL84 power tubes
• 3-band EQ
• 1-button footswitch for fat boost
• 1 x 1/4″ input

Fender Blues Junior IV is one of the most popular clean guitar amps with its great tone in a compact package. Its price also makes it very attractive for reaching good clean tones to take up your pedals. 

The amp comes with a spring reverb effect and a great Fender tone. It offers 15-watt power with a 12” Celestion Speaker and a fat switch to boost your tone with the included footswitch. You can control your tone with a 3-band EQ, too. Overall, it is a great amp if you want a good clean tone and tonal richness to get the best from your pedals.

Dr. Z Z Wreck 112

• 1 x 12″ Combo Tube Guitar Amplifier 
• 30-watt
• 1-channel
• 12″ Celestion Gold Speaker
• 3 x 12AX7 preamp tube
• 4 x 6N14N (power), 1 x 5AR4 (rectifier) power tubes
• Treble, Bass, and Cut controls
• 1 x 1/4″ input
• 3 x 1/4″ (4/8/16 ohms, 8 ohms internal) outputs
• Speed/Comfort plate voltage switch

Dr. Z Z Wreck 112 is an outstanding guitar amp that works perfectly with guitar pedals. The boutique combo amp was created by the country star Brad Paisley but is meant for any genre out there, thanks to its blank canvas tone. The amp is the ultimate amp for the pedals as it offers a glassy clean tone with impressive control features. It sits on the high-end side of the price range but is worth every penny if you want the best.

The amp’s star feature is the switchable plate voltage settings with a comfort speed switch for higher and faster response. It also has Treble, Bass, and Cut controls, along with a 12″ Celestion Gold Speaker and 30 watts of power. The amp is amazingly sensitive to touch dynamics both for fingerpicking and regular picking styles. It is one of the best clean amps you can find today.

Vox AC30C2

• 2×12″ Tube Guitar Combo Amplifier
• 30-watt
• 2-channel 
• Reverb and Tremolo Effects
• Effects Loop
• 2 x 12″ Celestion G12M Greenback Speakers
• 3 x 12AX7 preamp tubes
• 4 x EL84 power tubes
• 2-band EQ
• 4 x 1/4″ (high/low normal, high/low top boost) inputs
• 2 x 1/4″ (8/16 ohms) outputs
• 1 x 1/4″ (channel, reverb) footswitch (not included)

Vox AC30C2 is one of the most versatile amps of music history with its two-channel design, normal and top boost, reverb and tremolo effects, tone cut and volume controls, and great tonal range from edgy to overdriven tones as well as clean tones to take up your pedals. It offers 30 watts of power with 2 x 12″ Celestion G12M Greenback Speakers, an effects loop, 2-band EQ, 4 distinct inputs, 2 outputs, and a footswitch port for channel and reverb.

Furthermore, the master volume section comes with cut and volume controls. True bypass effects loop is there for your own pedals. The 8-/16-ohm output jack is switchable for external speakers, and the 16-ohm output jack is handy if you want to run the cab with internal speakers. The 3 x 12AX7 preamp tubes and 4 x EL84 power tubes work great and deliver amazing tonal ranges.

Fender ’68 Custom Twin Reverb 

• 2×12″ Tube Combo Amplifier 
• 85-watt
• 2-channel
• Tube Reverb and Vibrato effects
• Late-’60s tribute amp
• 4 x 12AX7, 2 x 12AT7 preamp tubes
• 4 x 6L6 power tubes
• 2 x 1/4″ (custom), 2 x 1/4″ (vintage) inputs
• 1 x 1/4″ (reverb, vibrato) 2 button-footswitch included

Fender ’68 Custom Twin Reverb is one of the most iconic guitar amps of history used by many great players, from Eric Clapton to Keith Richards and Jimi Hendrix. The modified tone circuit of the amp with two distinctive channels delivers great flexibility when used with other FX gear. 

It comes with 85 watts of power, a 2-channel design, a Tube Reverb and Vibrato effects, a 2-button-footswitch, and an amazingly transparent tone. The amp has the 60’s vintage vibes in looks and sound. It is one of the greatest amps you can get if you want a super clean tone or an overdriven tone that can take your pedals impressively and easily.

Roland JC-120 Jazz Chorus

• 2×12″ Solid State Guitar Combo Amplifier
• 120-watt
• 2-channel
• Reverb and Vibrato effects
• 3-band
• 2 x 12″ speakers
• 1 x 1/4″ input
• 2 x 1/4″ outputs
• Effects loop
• 3 x 1/4″ (chorus/vibrato, reverb, distortion) footswitch (not included)

Roland JC-120 Jazz Chorus is one of the most legendary clean amps of the ’70s era. It offers dual 60-watt power with its 2 12” speakers for large headroom and powerful sound. The amp can be heard in many iconic recordings of the 70s as it can go from subtle warble to wild modulation, depending on your setup.

The amp features a lively spring reverb and vibrato effects to add some spice to your tone if you want. It also has a bright switch to cut your sound through thick mids or to have a darker sound. Plus, you get effects loıop for even more versatility. You can also purchase the footswitch for switching between chorus/vibrato, reverb, and distortion modes. 

Fender 65′ Deluxe Reverb

• 1×12” All-tube Guitar Combo Amplifier
• 22-watt
• 2-channel
• Tube Reverb and Vibrato effects
• 4 x 12AX7, 2 x 12AT7 preamp tubes
• 2 x 6V6, 1 x 5AR4 (Rectifier) power tubes
• 2-band EQ
• 2 x Instrument (Normal), 2 x Instrument (Vibrato) inputs
• 2 x Speaker outputs
• 1 x 1/4″ (reverb, vibrato) 2-button footswitch (included)

Another iconic clean guitar amp is the Fender 65′ Deluxe Reverb, which comes with 22-watt power and a 12” Jensen C-12K speaker with ceramic magnet. The 2-channel amp has normal and vibrato channels along with tube-driven spring reverb and vibrato effects. The package also includes a 2-button footswitch.

The amp perfectly delivers the legendary Fender amp tones with a beautiful, clean sound. It sounds great with any pedal setup, thanks to its transparent tone. It works great with many genres, including rock, blues, country, and more. It is a great amp for players who, after a moderately powered amp, can be cranked up in the studio or on the stage.

Roland JC-40

• 2×10″ Stereo Solid State Guitar Combo Amplifier 
• 40-watt
• 1-channel
• Distortion, Vibrato, Chorus, and Reverb effects
• 3-band EQ
• Effects Loop
• Line Out
• Stereo Inputs
• 2 x 1/4″ inputs
• 2 x 1/4″ (Line) outputs
• 1 x 1/4″ headphones port
• 3 x 1/4″ (chorus/vibrato, reverb, distortion) footswitch (not included)

Roland JC-40 delivers a great choice for guitarists looking for the classic clean sounds of the Roland JC-120 but wanting a more compact package. It is the updated version of its bigger brother, as it comes with vibrato, distortion, chorus, and reverb effects. Plus, it has a stereo processor along with an effects loop.

The amp features 40-watt power with dual 10” speakers for large sound. The amp has a 3-band EQ to shape your sound. It offers a quite transparent sound to take up your pedals well. Furthermore, it has a headphones port and a line out. Overall, it is quite a versatile amp to use with your setup.

Bugera V5 Infinium

• All-tube 1×8″ Guitar Combo Amplifier
• 5-watt
• 1-channel 
• 1 x 8″ Turbosound speaker
• Reverb, Tone, Gain, and Volume Knobs
• Power Attenuator – 5W/1W/0.1W settings
• Infinium Tube Life Multiplier Technology
• 1 x 12AX7 preamp tube
• 1 x EL84 power tube
• 1 x 1/4″ input 
• 1 x 1/4″ (internal speaker) output
• 1 x 1/4″ headphones port

Bugera V5 Infinium is a compact all-tube 5-watt amp with great versatility and an amazing clean guitar tone. Its tube-soaked tones are perfect for pedal setups. It comes with a power attenuator for you to find the sweet spot. It also features a reverb and British-engineered turbo sound speaker for consistent tones. 

The amp also has sweet harmonics and warm distortion you can use whenever you want. The Infinium Tube Life Multiplier Technology makes the tube life much longer, and the classic style of the amp allows for great tonal shaping options. Plus, it comes with an internal speaker and headphones out port. 

Boss Katana-50 MkII

• 1×12″ Solid State Guitar Combo Amplifier
• 50-watt
• 50/25/0.5W power attenuator
• 5 amp voicings
• 60 Effects, 4 Tone Slots
• Cab-emulated Headphone/Record Output
• 1 x Type B USB port
• 3-band EQ, Tone control
• 1 x 1/4″ (instrument), 1 x 1/4″ (power amp), 1 x 1/8″ (aux in) inputs
• 1 x 1/4″ (rec/headphones) outputs
• 1 x 1/4″ (channel/bank) footswitch (sold separately)

Boss Katana-50 MkII is a highly versatile popular solid-state combo amp with 50-watt power and a 12” speaker. It has 5 amp voicings, customizable effects, and editor software to shape your sound. You can either take advantage of many different effects of the amp or use it as a clean amp for your pedal setup, thanks to the capability of the amp to sound transparent. 

The amp characters feature clean, crunch, lead, brown and acoustic. Plus, it has 60 different effects that you can reach with the Boss tone studio.  You can use the power attenuator to switch between 50-watt, 25-watt, and 0.5-watt power and craft your tone with gain, EQ, and effect controls. It also has 3 inputs for the power amp feature, instrument, and aux in, as well as a rec-headphone output.

Vox Pathfinder 10

• 1×6.5″ Guitar Combo Amplifier
• 10 watts
• 1 channel
• 2-band EQ
• 1 x 1/4″ input
• 1 x 1/4″ (headphones/line out) output

Vox Pathfinder 10 brings the classic Voxc sound in a compact design. The 10-watt amp comes with a 6.5” speaker and 2-band EQ to finetune your sound as you like. The amp might be small, but it sounds quite big. It has a clean-overdrive switch to go from crystal clear transparent sound for your pedal setup to dirty realms. The amp can deliver bluesy overdriven tones as well as high-gain modern rock tones.

The amp also features headphones out port for silent practice sessions and recording in the studio. Overall if you are looking for a compact and quite versatile practice or recording amp, Vox Pathfinder 10 is a great choice.

EVH 5150 Iconic Series 40-watt

• 1 x 12″ Tube Combo Amplifier
• 40-watt
• 2-channel
• 1 x 12″ EVH Celestion Custom Speakers
• 2 x 12AX7 preamp tubes
• 2 x 6L6 power tubes
• Noise Gate and Reverb effects
• 3-band EQ, Resonance, and Presence controls
• FX Loop
• Power Reduction Circuit
• Speaker-emulated Output
• 1 x 1/4″ input
• 1 x XLR (DI out), 1 x 1/4″ outputs
• 1 x 1/4″ (channel, boost) 2-button footswitch included

EVH 5150 Iconic Series 40-watt brings you the latter-day tone of the great Eddie Van Halen. It features 40-watt power with a dual-channel design. The green channel is for transparent cleans and overdrive crunch, while the red channel is for leads and blistering hot burn tones. Each channel has its own gain and volume controls along with mutual 3-band EQ, resonance, and presence controls.

The amp also has a built-in noise gate to prevent any hiss and hum. Plus, you get a smooth-sounding reverb whenever you want to add depth and dimension to your tone. The power reduction circuit is also great for versatility to play in gigs or home practice sessions. Overall, it is a highly versatile and amazing-sounding amp to take up your pedals.

Supro 1968RK Keeley

• 1 x 12″ Tube Combo Amplifier 
• 25-Watt
• 1-channel
• 12” Celestion G12M-65 Creamback Speaker
• 2 x ECC83S preamp tubes
• 2 x 6V6GT power tubes
• 1 x 1/4″ input
• 2-band EQ
• Effects Loop

The Supro 1968RK Keeley is the product of a collaboration between two legendary manufacturers, Keeley and Supro. The 25-watt clean guitar map is perfect to use with pedals with its large headroom. It has a 12” Celestion G12M-65 cream back speaker along with volume, treble, bass, and master knobs to fine-tune your sound.

The amp also has an effect loop circuit. It delivers the great blank page transparent sound for guitarists looking to get their premade tone with their pedal setup. The bell-like clear, clean tones of the amp are perfect for getting the most from your FX gear. Overall, it is a high-end amp but is one of the best amps to use with pedal setups.

Marshall DSL40CR

• 1×12″ Tube Guitar Combo Amplifier 
• 40-watt
• 2 channels
• High/Low Power Modes – 40 watts and 20 watts
• 1 x 12″ Celestion V-Type speaker
• 4 x ECC83 preamp tubes
• 2 x EL34 power tubes
• Speaker-emulated Line Output
• Digital Reverb – Classic and Ultra
• 3-band EQ, Tone Shift, and Resonance controls
• Effects Loop
• 1 x 1/4″ (instrument), 1 x 1/8″ (aux in) inputs
• 2 x 1/4″ (4 ohm), 2 x 1/4″ (8 ohm), 1 x 1/4″ (internal 16 ohm speaker), 1 x 1/4″ (Softube emulated out) outputs
• MIDI in-out
• 2-button footswitch (included)

Marshall DSL40CR is great for those who like the classic Marshall sound. It comes with two channels for classic gain and ultra gain but is also capable of delivering a clean state for pedal setups. Each channel has two modes with Clean/Crunch and OD1/OD2. You also get two different power modes for high and low power, depending on your use.

The amp has 3-band EQ, Tone Shift, and Resonance controls to give the final touch to your sound and includes a 2-button footswitch to change between modes. It also has a studio-grade digital reverb with two voicings. You also have the effects loop to get the full sound from your FX gear.

Fender Mustang LT25

• 1×8″ Guitar Combo Amplifier
• Solid State with Digital Modeling
• 25-watts
• 1 channel
• 20 amp models, 25 effects, and 50 presets 
• 1 x 8″ Fender Special Design speaker
• 2-band EQ
• 1 x 1/4″, 1 x 1/8″ (aux) inputs
• 1 x Micro-B 2.0
• 1 x 1/8″ headphones port
• 1 x 1/4″ (preset) footswitch port (footswitch not included)

Fender Mustang LT25 is not a traditional clean state amp as it is a Solid State amp with Digital Modeling, but it can deliver amazingly transparent sound with the right settings, taking up your pedals perfectly. The 25-watt amp features an 8″ Fender Special Design speaker and can bring you 20 amp models, 25 effects, and 50 presets if you need them.

The amp has a 1/4″ and a  1/8″ (aux) input along with a micro-B USB to further customize your sound and update the firmware. The amp has a headphones port and a port for the footswitch, too. If you need a bit more than just a clean-state amp, Fender Mustang is a great choice.

Vox Mini Superbeetle

• 1×10″ Guitar Amplifier Mini Stack
• Solid State Head with Cabinet
• Celestion 10″ Speaker
• 25-watt 
• 1-channel
• Korg NuTube preamp tube
• Digital Reverb and Tremolo effects
• 2-band EQ, Flat/Deep Switch controls
• 1 x 1/4″ input
• 2 x 1/4″ (speaker out), 1 x 1/4″ (headphones/line) outputs

Vox Mini Superbeetle is a great small guitar amp mini stack with an impressive tone. It delivers you the jaw-dropping British punch along with the NuTube technology giving the true tube-amp performance. The amp also works great as a blank page clean guitar amp to reflect your pedal setup’s tone. It features a Celestion 10″ Speaker and 25 watts of power, along with digital reverb and tremolo effects.

Plus, it has 2-band EQ, Flat/Deep Switch controls to finetune your sound. You also get a headphones port and two speakers out ports for extra versatility. Overall, it is a powerful and versatile amp to use with any FX gear.

Vox AC15C1X

• All-tube 1×12″ Guitar Combo Amplifier
• 15-watt 
• 2-channel
• Tremolo,and Reverb effects
• 1 x 12” Alnico Blue Speaker
• 3 x 12AX7 preamp tubes
• 2 x EL84 power tubes
• 2-band EQ
• 2 x 1/4″ (normal, top boost) inputs
• 2 x 1/4″ (8/16 ohms) outputs
• 1 x 1/4″ (reverb, tremolo) footswitch port (footswitch not included)

Vox AC15C1X is another great all-tube amp for British-style tones. It delivers the classic chime and complex grind of Vox amps and works great with any FX gear. The tones you get are quite large, and the amp is highly responsive to dynamics. It comes with 15-watt power and a 12” Alnico Blue Speaker that sounds amazing.

Furthermore, you have a 2-band EQ on the control panel along with dual input ports for normal and top boost. You get two outputs for 8 and 16 ohms as well as a footswitch port to switch between reverb and tremolo modes. Vox AC15C1X is a quite straightforward yet amazing-sounding amp for those looking for a crystal clear sound.

Mesa Boogie California Tweed 6V6

• Tube 1×12″ Guitar Combo Amplifier 
• 40/30/20/10/2-watt
• 1-channel
• 1 x 12″ Jensen Blackbird Alnico speaker
• Normal/Low Inputs
• Series Tube Effects Loop
• Long-tank Spring Reverb
• 5 x 12AX7, 1 x 12AT7 preamp tubes
• 4 x Mesa 6V6 power tubes
• Tube-driven Spring Reverb effect
• 3-band EQ, Presence controls
• 2 x 1/4″ (normal, low) inputs
• 1 x 1/4″ (8 ohm internal speaker), 2 x 1/4″ (4 ohm external speakers) outputs
• Buffered effects loop

Mesa Boogie California Tweed 6V6 brings the tweed-based performance with its 1×12-inch combo design and switchable 40-30-20-10-2-watt power. Duo-Class and Dyna-Watt technologies yield the 5 power and 2 operating class with 3 wiring options.

The amp has 3-band EQ and Gain, Presence, Reverb, and Master controls for crafting your sound, along with a reverb effect to add depth to your tone. The amp sounds quite transparent for reflecting your pre-made tone with the FX setup. The fully buffered effect loop is great for integrating your processors and pedals.

Orange Pedal Baby 100

• Solid-state Guitar Power Amp
• 100 watts
• 2-band EQ
• Single channel
• 1 x 1/4″ input
• 2 x 1/4″ (speaker out) outputs

Orange Pedal Baby 100 is a great amp head created to work with pedals. It is a great pedal platform amp that translates your FX tones to the main stage brilliantly. The head is quite compact and lightweight and features a straightforward design with 2-band EQ control.

The amp has the classic AB analog circuitry to get the touch and feel of your dynamics. It sounds very neutral to reflect your pedal setup’s tones. Another great aspect of the pedal is that it is very lightweight and portable. Orange Pedal Baby 100 can be the ultimate fly rig for your FX setup.

Fender Hot Rod Deville 212 IV

• 2×12″ Guitar Combo Amplifier 
• 60-watt
• 3-channel 
• 2 x 12″ Celestion A-Type speakers
• 3 x 12AX7 preamp tubes
• 2 x 6L6 power tubes
• Spring Reverb effect
• 3-band EQ controls
• Effects Loop
• 2 x 1/4″ (standard, -6dB) inputs
• 2 x 1/4″ (parallel, one internal speaker) outputs
• 1 x 1/4″ (channel, drive) footswitch port
• 2-button footswitch included

Fender Hot Rod Deville 212 IV is another great Fender amp that can take up your pedals and reflect your tone impressively. It comes with 3 channels, 60 watts of power, dual 12” speakers, spring reverb effect, and 3-band EQ controls, giving you the power and versatility you need. The amp also offers a spring reverb effect to give depth to your tone.

It features dual inputs, one for standard and one for a -6db cut. It has dual outputs for parallel or internal speakers, along with a footswitch port. Plus, you have an effects loop, too. You also get a 2-button footswitch with the pedal. 

Conclusion

Clean guitar amps great tools for guitarists who rely on their pedals and FX geat when creating their tones. These amps on the list are some of the best great ones that can reflect your desired tone created with your gear without coloring your one and giving you high volume levels without breaking up. So, depending on your budget and needs, you can go with any one of them.

If you found this article useful, you may want to save this pin below to your Guitar board.

Last update on 2024-12-18 / Affiliate links / Images from Amazon Product Advertising API